FERDINAND BERTHOUD – CHRONOMETRIE FB RSM Edition

 

FERDINAND BERTHOUD – CHRONOMÉTRIE FB RSM Tourbillon Gold 44mm Limited Edition 2022 

CHRONOMETRIE FB RSM:
AN ORIGINAL COMPLICATION DEVELOPED IN THE
GRAND TRADITION OF WATCHMAKING APPRENTICESHIP

Click, to see the large size. ▶ BIG FOTO

Ferdinand Berthoud devoted his life to experimentation and to passing on his knowledge by publishing numerous specialised works and training apprentices. The Chronomètre FB RSM continues this tradition by enabling a young watchmaker from the University of Neuchâtel to participate in the development of the movement as part of his graduation project.

Click, to see the large size. ▶ BIG FOTO

The FB-T.FC-RSM calibre, a tourbillon regulator with fusee-and-chain transmission, for the first time incorporates two complications appreciated by discerning collectors: independent deadbeat seconds visible on the dial side and a stop-seconds mechanism.

The historical source: Marine Clock No. 8

The Chronomètre FB RSM stands at the crossroads of the paths once trodden by Ferdinand Berthoud: between exploration and transmission, as well as between precision and innovation. Its design is inspired by the Marine Clock No. 8, known as H.M.8.

Click, to see the large size. ▶ BIG FOTO 

This is a very unusual clock. Dated 1768, it has a regulator-type display, meaning the indication of the hours, minutes and seconds is not coaxial. This type of display made it possible to improve the reading of time and thus to serve as a reference for seaborne navigation measurements: this is the role of a ‘time-keeper’ instrument in the truest sense of the term. 

Click, to see the large size. ▶ BIG FOTOThe hours are indicated on a disc at 2 o'clock. The minutes are also off-centred, with a dedicated counter at 12 o’clock. The seconds hand reigns supreme, occupying the central part of the watch face and advancing in one-second jumps (based on the ‘deadbeat’ seconds principle). All these functions are driven by a vertical movement, regulated by a thermo-compensated balance-spring equipped with inertia blocks.

Unique architecture

The FB-T.FC-RSM calibre features a pillar-type architecture, in which both the barrel and the inverted fusee are suspended and patented.

Click, to see the large size. ▶ BIG FOTO

This fusee-and-chain mechanism is inspired by that of Ferdinand Berthoud's marine chronometers. It ensures the distribution of energy by delivering ‘constant force’ to the patented tourbillon with direct-drive seconds. 

Click, to see the large size. ▶ BIG FOTO

This construction reduces the thickness of the movement – which at just 9.89 mm remains very thin for its category despite the regulator-type display and the integration of an independent deadbeat seconds mechanism.

An exclusive horological complication, created during an apprenticeship

In terms of both display and operation, the Chronomètre FB RSM offers a present-day take on the regulator-type principle. The hours are read off via a rotating disc at 2 o'clock; the minutes are indicated by a facetted and skeletonised hand on the subdial at 12 o'clock; and, as a symbol of precision, the seconds hand occupies a central position on the watch face.

Click, to see the large size. ▶ BIG FOTO

The “SM” letters added to the calibre reference pertain to the deadbeat seconds mechanism (seconde morte in French), while a balance-stop device enables the tourbillon to be stopped when setting the time to the exact second.

Click, to see the large size. ▶ BIG FOTO

In keeping with the tradition cherished by Ferdinand Berthoud, this complication was developed with a young apprentice watchmaker who devoted his graduation project to it. His work combined the history of deadbeat seconds clocks, the identification of related patents, and the development of the complication for the Tourbillon Régulateur à Force Constante (constant-force tourbillon regulator) calibre which was to house it. 

Click, to see the large size. ▶ BIG FOTO

Chronométrie Ferdinand Berthoud also wanted this complication to fit into the movement’s existing dimensions, while guaranteeing precision-timing performance duly attested by the COSC chronometer certification.

Deadbeat seconds and balance-stop device: the challenges of chronometry

The creation of a deadbeat seconds mechanism is a major challenge for any watch that claims to earn chronometer certification. This is because stopping and restarting the central hand in one-second jumps involves three steps: stopping the gear train concerned; storing the torque it continues to produce during this pause; and then releasing it all at once after one second.  

Click, to see the large size. ▶ BIG FOTO

Since the regularity of the torque is the essence of a constant-force calibre, interrupting its flow 60 times a minute without compromising its linearity is a true technical feat – which is why the majority of deadbeat seconds movements fail to achieve COSC certification. The Chronomètre FB RSM has been awarded this certification and is therefore a true timekeeper, like the Marine Clocks by the Master Watchmaker himself.

Click, to see the large size. ▶ BIG FOTO

The 18-carat gold dial is hand-engraved and bears the "No. 8" inscription like the original No. 8 Marine Clock, the inspiration for the FB RSM model. The deadbeat seconds mechanism is visible through a special symbolically figure-eight-shaped aperture at 9 o'clock

Click, to see the large size. ▶ BIG FOTO

Only 20 movements will be produced, and several key exterior elements can be chosen by the collector. They may be fitted inside a round or octagonal case. The 18-carat gold dial may retain its natural colour or receive a PVD treatment, giving it a glimmering metallic sheen. The 53-hour power reserve is visible from the back, close to the three key components of the FB-T.FC.RSM suspended movement: the fusee, the barrel and the tourbillon with direct-drive seconds.

Additional background knowledge

A longstanding tradition of apprenticeship

Few watchmakers can boast Ferdinand Berthoud's consistency in transmitting and perpetuating his knowledge. Barely had he opened his Paris workshop when he took his first apprentice under his wing for eight years. Jacques-Vincent Martin followed in 1766 and actually spent 20 years at Berthoud's side. Ferdinand also taught watchmaking to his nephew Pierre-Louis Berthoud (1754-1813), known as Louis Berthoud, as well as to a Spanish apprentice, Cayetano Sánchez, who was sent to learn from Ferdinand Berthoud how to maintain the clocks sent to the Spanish Armada in its quest to conquer the oceans. Ferdinand Berthoud also trained Jean Martin, another brilliant apprentice who cooperated with his master in creating several longitude clocks and astronomical pocket watches.

Click, to see the large size. ▶ BIG FOTO

These examples illustrate the two main focuses of Ferdinand Berthoud's career: the development of Marine Clocks, and the constant concern for passing on and recording his knowledge. In recognition of his skills in the first aspect of his work, he was awarded the title of Horloger mécanicien du Roi et de la Marine (Watchmaker-Mechanic by appointment to the King and Navy) in 1770.  

Click, to see the large size. ▶ BIG FOTO

He expanded the second aspect through an extremely abundant body of literature: about ten works and treatises, in addition to his contributions to the Encyclopaedia of Diderot and d'Alembert.

Why the Marine Clock No. 8?

Marine Clock No.8, owned by Louis XV, was tested at sea for two years (1768 - 1769). It is kept at the National Conservatory of Arts and Craft (CNAM) in Paris.

Click, to see the large size. ▶ BIG FOTO

The choice of this clock as a source of inspiration owes nothing to chance: it was this creation that earned Ferdinand Berthoud his precious royal warrant in 1770. This historic timepiece most probably benefited from the collaboration of the master's apprentice, Jacques-Vincent Martin, who had entered the service of Ferdinand Berthoud two years earlier, in 1766. The young man was to become a leading watchmaker and in 1786 was appointed Director of the Dépôt des Horloges Marine in Brest. 

 -------------------------------------------

TECHNICAL SPECIFICATIONS

Model:  CHRONOMÈTRE FB 2RSM Gold Edition

Click, to see the large size. ▶ BIG FOTO

• 🟠REF. FB 2RsM.2
  

CASE
• Round case in 18-carat rose gold, fitted with a transparent sapphire ‘porthole’
Total diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .     44 mm
Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    14.30 mm
Water resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    30 metres
Crown diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    9 mm

• 18-carat rose gold dynamometric crown (decoupling system)
• 18-carat rose gold screw-in case-back with a glare-proofed sapphire crystal
• Domed “chevee” sapphire crystal, glare-proofed on both sides
DIAL
• Openworked regulator plate (dial) in sandblasted and hand-engraved 18-carat rose gold
• Hours indication on sapphire disc at 2 o’clock
• Openworked, sandblasted and silver-toned minutes subdial at 12 o'clock with black Arabic numerals
• Flat inner bezel ring bearing the seconds graduation, in sandblasted silver-toned brass
• Deadbeat seconds mechanism visible at 9 o'clock
HANDS
• Facetted and skeletonised dagger-shaped minutes hand in 18-carat gold with blue CVD treatment
• Steel fixed hours pointer with blue CVD treatment
• Central seconds hand in titanium with blue CVD treatment
• Arrow-type power-reserve hand in 18-carat gold with blue CVD treatment on the back of the movement
STRAP AND BUCKLE
• Hand-sewn rolled-edge strap crafted from a single piece of alligator leather (125 x 70 mm, with a 20 mm buckle) – Various sizes available on request
• 18-carat rose gold pin buckle – Folding clasp available on request

=====================

Click, to see the large size. ▶ BIG FOTO

• 🔴 REF. FB 2RsM.2-1

CASE
• Round case in 18-carat rose gold, fitted with a transparent sapphire ‘porthole’
Total diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    44 mm
Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    14.30 mm
Water resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 metres
Crown diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  9 mm

• 18-carat rose gold dynamometric crown (decoupling system)
• 18-carat rose gold screw-in case-back with a glare-proofed sapphire crystal
• Domed “chevee” sapphire crystal, glare-proofed on both sides
DIAL
• Openworked regulator plate (dial) in vertical satin-brushed and hand-engraved 18-carat gold with black rhodium treatment
• Hours indication on sapphire disc at 2 o’clock
• Openworked, sandblasted and silver-toned minutes subdial at 12 o'clock with black Arabic numerals
• Flat inner bezel ring bearing the seconds graduation, in sandblasted silver-toned brass
• Deadbeat seconds mechanism visible at 9 o'clock
HANDS
• Facetted and skeletonised dagger-shaped minutes hand in 18-carat rose gold
• Gilded steel fixed hours pointer
• Gilded central seconds hand in titanium
• Arrow-type power-reserve hand in 18-carat white gold on the back of the movement
STRAP AND BUCKLE
• Hand-sewn rolled-edge strap crafted from a single piece of alligator leather (125 x 70 mm, with a 20 mm buckle) – Various sizes available on request
• 18-carat rose gold pin buckle – Folding clasp available on request

===================

Click, to see the large size. ▶ BIG FOTO

• 🔵 REF. FB 2RsM. 1

CASE
• Round case in 18-carat white gold, fitted with a transparent sapphire ‘porthole’
Total diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  44 mm
Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    14.30 mm
Water resistance . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    30 metres
Crown diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    9 mm

• 18-carat white gold dynamometric crown (decoupling system), with black ceramic medallion
• 18-carat white gold screw-in case-back with a glare-proofed sapphire crystal
• Domed “chevee” sapphire crystal, glare-proofed on both sides
DIAL
• Openworked regulator plate (dial) in vertical satin-brushed and hand-engraved 18-carat gold with blue CVD treatment
• Hours indication on sapphire disc at 2 o’clock
• Openworked, sandblasted and silver-toned minutes subdial at 12 o'clock with black Arabic numerals
• Flat inner bezel ring bearing the seconds graduation, in sandblasted silver-toned brass
• Deadbeat seconds mechanism visible at 9 o'clock
HANDS
• Facetted and skeletonised dagger-shaped minutes hand in 18-carat white gold
• Steel fixed hours pointer
• Central seconds hand in titanium
• Arrow-type power-reserve hand in 18-carat gold with blue CVD treatment on the back of the movement
STRAP AND BUCKLE
• Hand-sewn rolled-edge strap crafted from a single piece of alligator leather (125 x 70 mm, with a 20 mm buckle) – Various sizes available on request
• 18-carat white gold pin buckle – Folding clasp available on request

FUNCTIONS
• Disc-type hours display at 2 o'clock, pointer-type minutes display at 12 o'clock, deadbeat seconds in the centre, stop-seconds device and power reserve

MOVEMENT
Mechanical hand-wound . . . . . . . . . . . . . . . . .  Calibre FB-T.FC.RSM
Diameter . . . . . . . . . . . . . . . . . . . . . . . . . . . .     37.30 mm
Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.89 mm
Lignes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .     15 ¾
Jewels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    60
Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . .     21,600 vph (3 Hz)
Power reserve . . . . . . . . . . . . . . . . . . . . . . . . . 53 hours
Limited edition (all case types) . . . . . . . . . . . .  20 movements

TECHNICAL CHARACTERISTICS   
• Tourbillon with fusee-and-chain transmission (constant force)
Suspended fusee – differential winding system (PATENT)
Suspended barrel – Maltese cross stopwork system (PATENT)
• Regulator-type display
• Independent deadbeat mechanism visible on the dial side
• Power-reserve indicator on the back of the movement
• Variable-inertia balance with four nickel silver inertia blocks
• Balance spring with hand-crafted Phillips outer terminal curve (steel)
• Swiss lever escapement
• Crown-activated stop-seconds mechanism
• Half-bridges in nickel silver, fixed on stylised polished steel pillars
• Hand-finished to the highest watchmaking standards
Components . . . . . . . . . . . . . . . . . . . . . . . . . .     1169 (including chain)
Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    790 components
Length of the chain . . . . . . . . . . . . . . . . . . . . . 285 mm
Half-bridges . . . . . . . . . . . . . . . . . . . . . . . . . .     18
Pillars      . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    6

Tourbillon
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .    1 /minute
Components . . . . . . . . . . . . . . . . . . . . . . . . . .     67
Tourbillon carriage. . . . . . . . . . . . . . . . . . . . . .    Ø 16.55 mm (titanium)
Tourbillon carriage fixed to . . . . . . . . . . . . . . .     3 polished titanium pillars
Tourbillon carriage poised by . . . . . . . . . . . . . . 2 weights in 18-carat gold
Balance wheel . . . . . . . . . . . . . . . . . . . . . . . . .    Ø 12 mm (copper-beryllium)

Officially chronometer-certified by the COSC
 

Limitation  Only 20 pieces of each version watches

=====================--
Press Release - 2022
-------------------------------------

-------------------------------------------------------------
Chronométrie FERDINAND BERTHOUD SA
Rue des Moulins 20
Case postale 128
2114 Fleurier, Val-de-Travers (NE)
Switzerland
-------------------------------------------------------------------
www.facebook.com - Ferdinand Berthoud 
----------------------------------------------------------------------------
www.FerdinandBerthoud.ch