A. Lange & Sohne – ODYSSEUS - 2019

A. Lange & Sohne – ODYSSEUS Stainless Steel Dark Blue Dial 2019

The ODYSSEUS opens up a new chapter for A. Lange & Söhne. It lays the foundation for a further watch family: the sixth one. For the first regularly produced timepiece in stainless steel, the Saxon watchmakers developed a tailor-made self-winding movement with a large day-of-week and date display.

The ODYSSEUS is a sporty-elegant watch for people who admire fine watchmaking but live active lives. The prominent design of the stainless-steel case with a diameter of 40.5 millimetres and a height of 11.1 millimetres, featuring an integrated stainless-steel bracelet, embraces traditional brand elements and reinterprets them.

Click, to see the large size. ▶ BIG FOTO

This applies particularly to the sculpted, slightly cantilevered middle band of the three-part case. Its surfaces are decorated with a satin contour finish and the edges are emphasised with a chamfer. The combination of brushed surfaces and chamfered edges is echoed on the lugs and links of the massive stainless-steel bracelet. Specially sealed, tapered buttons for correcting the date and the day of week are arranged at 2 and 4 o'clock.

Click, to see the large size. ▶ BIG FOTO

The ODYSSEUS is the first Lange watch with a water-resistant case and a screw-down crown, exposed to a test pressure of 12 bar.

New watch family

Today, A. Lange & Söhne has five watch families: LANGE 1, SAXONIA, 1815, RICHARD LANGE and ZEITWERK.

Click, to see the large size. ▶ BIG FOTO

The ODYSSEUS is a new face that introduces a sixth watch family. And as usual at Lange, it is endowed not only with a distinctive design but also with a newly developed movement.

Date and day-of-week display

What first meets the eye on the dark-blue dial is the day-of-week and date display. Located on the right, the Lange outsize date in the classic double aperture is complemented with an equally large day-of-week display on the left.

Click, to see the large size. ▶ BIG FOTO

The outer verticals of the frames echo the curvature of the bezel. The typical Lange font is used for both displays, though here, the numerals and letters are white against a blue background. The newly developed mechanism consists of 99 individual parts.

Three-dimensional dial

The dial is made of brass and has several levels with different surfaces. Just like the outer scale of the subsidiary seconds dial, the notched baton appliques made of white gold lie above concentric lines, a technique called azurage. They contrast against the grained inner surfaces of the main and subsidiary dial.

Click, to see the large size. ▶ BIG FOTO

A bevelled, argenté-coloured flange ring with a printed minute scale frames the dial. The number 60, printed in red at 12 o'clock, provides a colourful accent. In the ODYSSEUS, the brand-typical lancet-shaped hands for hours and minutes are more prominent than in other watches of the manufactory. Just like the inner surfaces of the baton appliques, they are luminous.

Adjustable steel bracelet

The stainless-steel bracelet is eminently comfortable to wear. Its length can be adjusted in small steps up to 7 millimetres thanks to a safety deployant buckle.

Click, to see the large size. ▶ BIG FOTO

By pressing the pusher embossed with the Lange signature the bracelet can be pulled or pushed to adjust the desired length. It is not necessary to open the buckle. If required, the bracelet can also be extended by adding further links.

Movement for an active lifestyle

For the ODYSSEUS, A. Lange & Söhne developed the new L155.1 DATOMATIC manufacture calibre. The name DATOMATIC visible on the rotor stands for the date mechanism combined with automatic winding.

Click, to see the large size. ▶ BIG FOTO

With a diameter of 32.9 millimetres, the movement – visible through the sapphire-crystal caseback – completely fills the case. It features a unidirectionally winding central rotor with a centrifugal mass in platinum. Thanks to the skeletonisation of the rotor further details of the manually executed, lavish finissage of the movement can be observed.

New escapement

When fully wound, the mainspring barrel delivers a maximum power reserve of 50 hours. To guarantee high rate accuracy regardless of external factors, the new self-winding calibre operates at a frequency of 28,800 semi-oscillations per hour (4 hertz). The newly designed balance is regulated with four countersunk poising screws that are flush with the outside of the balance-wheel rim.

Click, to see the large size. ▶ BIG FOTO

This design reduces turbulence despite the higher frequency. Together with the freely oscillating balance spring made in-house, the minimised air resistance has a positive impact on the movement's rate accuracy and energy efficiency.

Bridge instead of balance cock

The oscillation system of the ODYSSEUS is held by a balance wheel bridge secured at two points. It is manually engraved with a wave motif. Other movement decorations also express the concept of combining traditional facets with new ones. All frame parts of the calibre L155.1 DATOMATIC are made of German silver. Additionally, elements of the rotor were black-rhodiumed.

Click, to see the large size. ▶ BIG FOTO

In accordance with the A. Lange & Söhne philosophy, the entire movement is elaborately finished by hand and assembled twice. A further typical Lange hallmark, a screwed gold chaton secures the upper bearing jewel of the escape-wheel arbor.

Click, to see the large size. ▶ BIG FOTO

 

It also marks the position of the escapement and places a traditional accent, right there where the heart of the watch beats.

----------------------------------------

Technical Specifications

Model:  ODYSSEUS 

Reference   363.179

Movement
Calibre L155.1
Number of parts     312        
Screwed gold chantons     1        
Power reserve     50 hours        
Frequency 28,800 A/h / 4 Hz
Rubies     31
Case 
Measurements     Steel
Case-diameter     40.5 millimetres        
Case-height     11.1 millimetres    
Dial
Dark-blue
Hands white gold
Bracelet
Stainless Steel bracelet, folding clasp  with logo A. Lange & Sohne


Price: 28.000 €*

*Recommended retail price in Germany including VAT. Non-binding quotation, prices subject to change.

--------------------------------
Press Release - 2019
-------------------------------------------------------
Contact information for the media
Arnd Einhorn, Director Press and PR
* Tel.: +49 (0)35053 44-5505
* E-mail: presse@lange-soehne.com
------------------------------------------------------------------
www.facebook.com - Lange&Soehne
-------------------------------------------------------------------------------
www.Alange & Soehne.com