Friday, October 14, 2022

Glashutte Original – SeaQ Chronograph Blue Dials Automatic

 

Glashutte OriginalSpezialist SeaQ Chronograph Blue Dials Automatic 2022

Click, to see the large size. BIG FOTO

 Write your own adventure!
The SeaQ Chronograph celebrates its premiere

Once again, the manufactory from the German watchmaking town of Glashütte presents the real thing – a genuine original in more ways than one. The new SeaQ Chronograph is the first diver’s watch from Glashütte Original to be equipped with a chronograph movement. 

Click, to see the large size. BIG FOTO

The new model features a handmade automatic movement designed to accompany contemporary adventurers wherever they go – a challenge the designers at Glashütte Original took on with great sensitivity and creativity. The result? A modern mechanical movement full of originality.

The challenge

In developing the new chronograph, Glashütte Original based the design concept on four considerations: how can it be made as accurate, robust, easy to use and aesthetically pleasing as possible? For the new SeaQ Chronograph, the bar was set exceptionally high. 

Click, to see the large size. BIG FOTO

The objective was to develop a flyback chronograph that handles short-term measurement reliably and to combine it with a watch that meets the rigorous requirements of the ISO and DIN standards for diver’s watches. 

Click, to see the large size. BIG FOTO

The stakes could not be higher: to ensure that a handmade, finely crafted mechanism was ready – not just for everyday use, but for extreme conditions.

Short-term measurement meets diver’s watch

A diver’s life may well depend on their watch functioning properly. For this reason, the watches in the SeaQ family are subjected to rigorous testing to ensure they meet the ISO 6425 and DIN 8306 standards. 

Click, to see the large size. BIG FOTO

They must withstand extreme temperature changes, resist saltwater corrosion, ensure optimal legibility in the dark and have a unidirectional rotating bezel with a scale allowing the diver to determine how much time remains for the dive. 

Click, to see the large size. BIG FOTO 

For the water resistance test, Glashütte Original exceeded the standard and tested the SeaQ up to a pressure of 30 bar (300 meters). The watchmaker also set its own high standards for the chronograph: the watch had to have a column wheel switch and a flyback mechanism. The designers took these and many other aspects into account as they developed the SeaQ Chronograph.

Under the loupe: a tiny turn for greater shock resistance

One of the requirements for diver’s watches: shock resistance from a height of one meter. Apparently straightforward, it’s a nightmare for everyone who owns a mechanical watch – in reality a situation one would avoid at all costs.

Click, to see the large size. BIG FOTO 

The watchmakers at Glashütte Original examined this aspect closely, using a special device under laboratory conditions. In particular, the key point – if the watch is dropped – is to ensure that the dial does not buckle or warp on impact, which could interfere with, or even block, the hands. 

Click, to see the large size. BIG FOTO

As a result, the designers placed a hollow hexagonal socket screw, made of stainless steel, in the centre of the dial. It is placed from above over the hand shafts, thus fixing the dial to the plate before the hands are mounted. 

Click, to see the large size. BIG FOTO 

Thanks to this small but very effective construction detail, the dial remains securely in place, even in the event of a shock.

Under the loupe: even more space for rate precision

Both resistance and rate precision are of fundamental importance for the functional reliability of a mechanical watch. This also involves the effort to achieve optimally uniform – isochronous – oscillation of the balance, in every position and even while the chronograph is running. 

Click, to see the large size. BIG FOTO 

For this reason, Glashütte Original’s designers chose to intervene directly in the architecture of the SeaQ Chronograph movement. The balance was given more space, allowing it to oscillate unhindered and thus gain a few degrees of valuable amplitude. They created space to move freely – for the watch and the person wearing it.

Under the loupe: a versatile crown offers even greater ease of use

The SeaQ Chronograph’s short-term measurement is a world of its own. It features a flyback function, i.e. reset and restart of the stop hand on the fly, central stop-seconds, and a 30- minute counter at 3 o’clock; all are operated using the two pushers on the edge of the case. In addition, Glashütte Original’s signature Panorama Date is found just above 6 o’clock. 

Click, to see the large size. BIG FOTO 

All of these displays are easily set via the crown: in position 1, the automatic movement is wound, in position 2 the date can be corrected, and in position 3, the time can be set while the second stop is activated. 

Click, to see the large size. BIG FOTO

This design made it possible to do without a separate date corrector on the side of the case, thus enhancing the water resistance of the watch.

A contemporary chronograph movement

The automatic movement Calibre 37-23 combines maximum resistance, precision and userfriendliness with a running time of over 70 hours. The silicon balance spring offers enhanced resistance to the influence of magnetic fields, for example, and thanks to its steady oscillation, greater rate precision. 

Click, to see the large size. BIG FOTO 

The entire movement is elaborately decorated by hand with great skill and sensitivity, and can be admired through its sapphire crystal case back – by no means a given with a diver’s watch.

A sporty and elegant companion for any and all adventures

The debut model of the SeaQ Chronograph is dressed in dark blue, from the handmade dial to the unidirectional rotating bezel with ceramic inlay. The hour, minute and stop-seconds hands are coated with highly luminous Super-LumiNova®, as are the indexes and the triangle symbol on the bezel. 

Click, to see the large size. BIG FOTO  The stainless steel case, 43.2 mm in diameter, is fitted front and back with sapphire crystals, and the fluted screw-down crown has a fine wave decoration. Four different straps are available: a dark blue rubber strap, a stainless steel link bracelet, and two synthetic fabric straps made from recycled fishnets, in grey or blu

A special premiere

For the Glashütte Original team, the development of the new SeaQ Chronograph turned into a multi-year voyage of discovery. Now the watch is ready to accompany its owners from all over the world on their own uniquely individual adventures. 

Click, to see the large size. BIG FOTO 

The new SeaQ Chronograph is available as of October 2022 from all Glashütte Original Boutiques and selected retailers worldwide.

  -----------------------------------------
TECHNICAL SPECIFICATIONS

Collection : Spezialist

 Model name:  SeaQ Chronograph Blue Dials Automatic

Click, to see the large size. BIG FOTO 

Reference: 1-37-23-02-81-33 (rubber strap)
Reference: 1-37-23-02-81-34 (grey fabric strap)

Click, to see the large size. BIG FOTO 

Reference: 1-37-23-02-81-36 (blue fabric strap)
Reference: 1-37-23-02-81-70 (metal bracelet)

Case
    Material:
Polished/satin-brushed stainless steel
    Diameter: 43.2 mm
    Rotating bezel with ceramic inlay
    Glass: Sapphire crystal, anti-reflective on both sides
    Engraved case back with sapphire crystal
    Water-resistant to 300 metres (30 bar)
Dial and hands
    PVD blue, rhodium-plated appliques with Super-LumiNova®
Movement
    Calibre 37-23
, automatic winding, finely finished
    Frequency: 28,800 vph (4 Hz)
    Power reserve of 70
hours
Functions/Indications
    Hour, minute (central), small second
    Chronograph with flyback, stop seconds (central), 30-minute counter
Strap and buckle
    Black rubber with pin buckle or folding clasp
    Grey synthetic fabric with pin buckle or folding clasp
    Blue synthetic fabric with pin buckle or folding clasp
    Stainless steel bracelet with fine adjustment mechanism

MSRP
    EUR 14,400, fold fastener (1-37-23-02-81-33)
    EUR 14,100, clasp (1-37-23-02-81-06)
    EUR 15,300, fold fastener (1-37-23-02-81-70)


 

Price: from 13,500 Euro

Launch year: 2022

---------------------------------
Press Release - 2022
---------------------------------
-------------------------------------------
For further information please contact:
Glashütte Original I Press Office
Altenberger Strasse 1 I D-01768 Glashütte i. Sa.
Telephone: +49 (0) 350 53 46 - 0
E-Mail: pr@glashuette-original.com
----------------------------------------------------------------
www.facebook.com - Glashuette Original
------------------------------------------------------------------------------
www.Glashuette-Original.com

No comments:

Post a Comment