RAYMOND WEIL – FREELANCER PIPER Chronograph

RAYMOND WEIL – FREELANCER PIPER GMT Chronograph NEW

In tribut to its founder’s deep passion for aviation, Swiss watchmaker RAYMOND WEIL is proud to partner with legendary aviation manufacturer Piper Aircraft Inc. to present its first-ever pilot watch: the freelancer Piper.

 Click on the mouse wheel to see the large size ...             BIG FOTO

Made of titanium and stainless steel, this 45mm freelancer features a mechanical self-winding chronograph movement with date and GMT functions, making it easy for all experienced pilots to read. .

 Click on the mouse wheel to see the large size ...             BIG FOTO

The shiny blue minute and hour hands resemble the aircraft’s rotor blades while the GMT hand, with its red pointer, references a compass. The small seconds sub-dial at 9 o’clock is inspired by the attitude indicator and the openwork black leather strap completes the aviator look of the timepiece.

 Click on the mouse wheel to see the large size ...             BIG FOTO

With its tachometric bezel, 100-meter water resistance and 46-hour power reserve, flying enthusiasts can set off to conquer the skies and discover new horizons above the clouds. Each freelancer Piper watch will be offered in a special box, which will include a model of a RAYMOND WEIL-branded Piper aircraft.

 Click on the mouse wheel to see the large size ...             BIG FOTO

“We are thrilled to be partnering with best-in-class manufacturer, Piper Aircraft Inc. on our first-ever pilot watch. Raymond Weil was not only a visionary and daring entrepreneur but also a passionate pilot and the proud owner of a Piper plane”, says Elie Bernheim, CEO of RAYMOND WEIL. “The freelancer Piper is a fitting homage to my grandfather and the invaluable heritage he left us. I am sure he would be immensely proud of this new introduction.”

 Click on the mouse wheel to see the large size ...             BIG FOTO

Throughout his life, Raymond Weil demonstrated a visionary’s thinking, an independence of spirit and an admirable determination. An enthusiastic pilot, he was particularly fond of mountain flights, especially around the Matterhorn, which he did not hesitate to admire with his Piper plane during his travels in Switzerland.

 Click on the mouse wheel to see the large size ...             BIG FOTO

As a nod to the man’s dear passions, the advertising campaign unveiling the freelancer Piper watch features the Swiss Alps and displays a RAYMOND WEIL-branded Piper plane.

--------------------------------------------------------
Technical Specifications

 

 Click on the mouse wheel to see the large size ...             BIG FOTO

Reference:  7754-TIC-05209

Model: FREELANCER PIPER Chronograph 45mm

Movement  
Mechanical – RW5020
Winding: Automatic
Power reserve: 46 hours
Jewels: 25
Functions 
Central hours and minutes, small seconds hand at 9 o’clock
Date window at 4 o’clock
Central GMT hand
Chronograph

• Start, stop and restart using push-button at 2 o’clock
• Reset using push-button at 4 o’clock
• Central chronograph hand
• 30 minutes counter at 12 o’clock
• 12 hours counter at 6 o’clock
• Tachometer ring

Case 
Round – Titanium and stainless steel
   Diameter: 45mm
   Thickness: 13.7mm
Crown: Screwed and fluted with RW monogram
Crystal: Sapphire crystal with dual-sided antiglare treatment
Case back: Screw down, with sapphire crystal
Water resistance: 10 ATM
Dial  Black
Indexes: Arabic numerals enhanced with luminescent materia
Hands
Hours / Minutes: Black, barrel-shaped, enhanced with luminescent material
Second at 9 o’clock: Red, baton type 
Chronograph:  Blue, barrel-shaped
GMT: Black with red pointer and enhanced with luminescent material, barrel-shaped 
Bracelet 
Black open work genuine leather strap with a RW titanium and
stainless steel folding clasp with double push-button security system
-----------------------  
Press Release
--------------------------
www.piper.com 
--------------------------------------------  

www.facebook.com - Raymond Weil
-------------------------------------------------  
blog.Raymond-Weil.com
-----------------------------------------------------------------
www.Raymond-Weil.com

ORIS – Audi Sport Limited Edition II

ORIS – Audi Sport Titanium Black Chronograph Limited Edition II NEW

Click on the mouse wheel to see the large size ...                   BIG FOTO

Track Record

In the second year of the landmark partnership between Oris and Audi Sport, the Swiss watch maker Oris present s the Audi Sport Limited Edition II. The watch is dedicated to the ground-breaking Audi R18 e-tron quattro, featuring its silhouette on the case back. 

Click on the mouse wheel to see the large size ...                   BIG FOTO

Oris is the Official Watch Partner of the Audi Sport teams racing in both the FIA World Endurance Championships (WEC) and German Touring Car Championship (DTM). Audi Sport has won the famous endurance event at Le Mans an unprecedented 12 times since 2000.

Click on the mouse wheel to see the large size ...                   BIG FOTO

In 2014, it topped the podium again with the Oris-sponsored Audi R18 e-tron quattro, which was piloted to victory by a team including Swiss driver and Oris Ambassador, Marcel Fässler.

Click on the mouse wheel to see the large size ...                   BIG FOTO

Oris has a long track record of producing high-performance motorsport timepieces, with a heritage that can be traced back to the 1970 Chronoris.

Click on the mouse wheel to see the large size ...                   BIG FOTO

The Audi Sport Limited Edition II is the latest in the line. Like Audi Sport’s high-tech cars, it’s engineered to be as light and as strong as possible, and is packed with a series of innovative features.

Click on the mouse wheel to see the large size ...                     BIG FOTO

Among those is its automatic chronograph, powered by Oris Calibre 778, which features a 10-minute countdown. This useful function is aimed at drivers looking to keep track of race start times.

Click on the mouse wheel to see the large size ...                   BIG FOTO

The watch also features useful day and date indications at 3 o’clock, and the Oris-developed retrograde small seconds at 9 o’clock, which takes its design cues from the dashboard instruments of modern race cars.

Click on the mouse wheel to see the large size ...                   BIG FOTO

Oris has given its new Audi Sport timepiece a stealthy all-black look: its case is cast in lightweight titanium and PVD coated in black DLC; it has a black dial;

Click on the mouse wheel to see the large size ...                   BIG FOTO

Click on the mouse wheel to see the large size ...                   BIG FOTO

... and the bi-directional rotating bezel has a scratch-resistant black ceramic insert engraved with a minute scale. Eye-catching red central seconds and sub-dial counter hands protect the watch’s legibility.

Click on the mouse wheel to see the large size ...                   BIG FOTO

Click on the mouse wheel to see the large size ...                   BIG FOTO

The Oris Audi Sport Limited Edition II will be worn by Audi Sport drivers during the 2015 season, and is limited to 2,000 pieces. It will be available in June 2015.

Click on the mouse wheel to see the large size ...                   BIG FOTO

Click on the mouse wheel to see the large size ...                   BIG FOTO

------------------------------------------------------
Product Features

Model: Oris - Audi Sport Limited Edition II
Reference No. 778 7661 7784 LS1 Ø 44.00mm 
Limited to 2,000 pieces

Movement
Automatic mechanical movement  
Oris Cal. 788 (based on Sellita  SW500)
With Chronograph function and date function at 3 o’clock
Functions 
Centre hands for hours, minutes and seconds,
Enlarged individual date and day windows,
Instantaneous date, fine timing device and stop-second
Case
Multi-piece titanium case,
screw-in stainless steel crown and stainless steel pushers,
all with black DLC coating
Water resistant to 10 bar/100m
Bi-rotating black ceramic bezel with minute scale and rubber coated ‘good grip’ insert on the outside edge
Special engraved titanium case back with black DLC coating and engraved limited number
Water resistance to 10 bar/100m
Crystal
Sapphire crystal domed on both sides and with anti-reflective coating on both side.
Dial
Two piece matt black dial
Dial ring with tachymeter scale directly assembled to the case
Second and minute counters
Applied numerals filled with black Super-LumiNova
Black polished nickel hour and minute hands with Super-LumiNova inlay;
central seconds and subdial counter hands in red
Special retrograde small seconds display at 9 o’clock developed by Oris
Strap
Black perforated leather racing strap with black DLC coated titanium folding clasp
Extras
Special luxury wooden presentation Alcantara-like black box.
Edition
Limited edition 2000 pieces
Price
Swiss Retail Price: CHF 3,900.00
----------------------------
Press Release
-----------------------------------
www.orisaudisportcompetition.com 
-------------------------------------------
 www.facebook.com - ORIS
----------------------------------------------------
www.Oris.ch

ARNOLD & SON – Instrument TB TIGER Limited Edition

ARNOLD & SON – Instrument TB TIGER 22-Carat Gold Limited Edition NEW

A consummate marriage of Metier d’Art hand-engraving
and miniature hand-painting from Arnold & Son

The latest addition to the Arnold & Son Instrument Collection combines the marine precision of the true-beat (TB) movement with aesthetic perfection. Featuring one of the instantly recognizable design cues of the Instrument Collection, the off-centre positioning of the time display at 9 o’clock leaves a generous open area and creates a perfect setting for the exquisite engraved and hand-painted depiction of a tiger. To underline its exclusivity, this fabulous example of high-precision technology and aesthetic perfection is available in a limited edition of just twenty-eight pieces.

Click on the mouse wheel to see the large size ...                 BIG FOTO

TB Tiger
Arnold & Son manufacture movement A&S6103, self-winding,
black dial, 22-carat solid rose gold engraved appliqué with hand-painted miniature,
22-carat rose gold case, diameter 44 mm

© Arnold & Son

The dominant feature of this fine-quality wristwatch is a hand-engraved appliqué of a tiger executed by Arnold & Son’s master engraver, which is then duplicated for the series. Hand engraving is a traditional art form that makes use of hardened steel tools called burins and other special implements. They create cuts, lines and texturing that build up entire images or, as in the case of the TB Tiger, a perfectly sculpted figure of a tiger in solid 22-carat rose gold.

Click on the mouse wheel to see the large size ...                 BIG FOTO

The breathtaking richness of detail is then duplicated in rose gold for the rest of the series. Once the appliqué is in place on the dial, the tiger’s black stripes are painted by hand, a process that accentuates its three dimensional nature. Hand engraving and miniature painting both call for infinite patience and expertise and take many years of concentrated practice to fully master.

Click on the mouse wheel to see the large size ...                 BIG FOTO

With its pure, timeless design, the Instrument Collection takes its inspiration from the chronometers produced by John Arnold’s son, John Roger, in the latter part of his career. The true beat is a rare complication these days, and combining it with an automatic winding system calls for enormous technical expertise. In the A&S6103, this was made possible by a patented system comprising a sophisticated double wheel, an oscillating pinion and a pallet mechanism.

Click on the mouse wheel to see the large size ...                 BIG FOTO

A&S6103 movement

© Arnold & Son

A solution of this complexity calls for microscopic precision (to tolerances of a micron, or one thousandth of a millimetre), and the key components are made using state-of-the-art LIGA manufacturing technology. The case houses the rhodium-treated A&S6103 movement with Haute Horlogerie finishing. All the plates and bridges in the movement are hand-chamfered and decorated – a further indication of the traditional craftsmanship upheld by Arnold & Son.

The TB Tiger special edition is limited to just twenty-eight timepieces.
---------------------------------------------------------
Technical Characteristics

Model: Instrument Collection - TB TIGER

References:  1ARAP.B03A.C121P, 22-carat Rose Gold Case

Calibre:                                  
A&S6103
Arnold & Son manufacture movement, self-winding,
ceramic ball bearing, 30 jewels,
diameter 30.4 mm, thickness 7.79 mm,
power reserve 50 h,
28,800 vibrations/h, stop second device
Functions:
Hours, minutes, true beat seconds
Movement decoration:
Rhodium treated with Haute Horlogerie finishing:
Hhand-chamfered bridges with polished edges,
fine circular graining and Côtes deGenève rayonnantes,
brushed and skeletonised oscillating weight,
blued screws with bevelled and mirror-polished heads.
Dial:
Black
22-carat solid rose gold engraved appliqué with hand-paintedminiature
Case:   
22-carat rose gold, diameter 44 mm,
cambered sapphire with antireflective coating on both sides,
see-through sapphire case back
Water-resistant to 30 m
Strap: 
Hand-stitched black or brown alligator leather

Limited edition: 28 timepieces
-----------------------------------------
Marketing & Sales
Boulevard des Eplatures 38
CH – 2300 La Chaux-de-Fonds
Switzerland
info@arnoldandson.com
---------------------------------------------------
 www.ArnoldandSon.com - Media
--------------------------------------------------------------------
www.Arnold&Son.com

A. Favre & Fils – Phoenix 10.3 - Twin Regulator

A. Favre & Fils – Phoenix 10.3 - Twin Regulator With Differential Gear NEW

Click on the mouse wheel to see the large size ...           BIG FOTO

A sensorial experience of two hearts beating as one

A tribute to the works of Abraham-Louis Breguet and, closer to us, Philippe Dufour, the  Phoenix 10.3 presents, on the dial side, the twin pulsation of oscillators that mutually compensate each other, averaging errors through a differential gear.

Click on the mouse wheel to see the large size ...           BIG FOTO

Phoenix 10.3 GATSBY

In the quest for precision, the twin regulator is a complication that finds its relevance in a wristwatch that must endure important gravitational stresses. Beyond its mechanical prowess, the three-dimensional architecture of the movement achieves the reconciliation of the parts with the whole.

Click on the mouse wheel to see the large size ...           BIG FOTO

The front stage is all about symmetry. We peal the layers down, showing the magic in motion, from the regulators dragging their escapements to the rotating differential gear. In the backstage, owner’s privilege, asymmetry fights back.

Click on the mouse wheel to see the large size ...           BIG FOTO

We take off with a wolf teeth ratchet wheel and its eagle shaped c lick and aircraft’s spring. We land on the other side of the differential gear train, mounted on a winged bridge, with non-conical satellite gears to limit the friction on the escapement.

Click on the mouse wheel to see the large size ...           BIG FOTO

 Phoenix 10.3 HUGO

Three centuries of watchmaking history allow us to draw freely from different eras and tendencies. For this piece, we chose the golden years of the Roaring Twenties, where the angular geometry of art-deco followed the crazy curves of art-nouveau, an endless reservoir of mechanical inventions, architecture and fine arts.

We bring movement decoration, trimming work that became an art, into a new dimension.

Click on the mouse wheel to see the large size ...           BIG FOTO

 We climb on progressive angles, on balcony “beach” chamfers and continued reliefs on different bridges. The front stage is all about symmetry. We peal the layers down, showing the magic in motion, from the regulators dragging their escapements to the rotating differential gear.

Click on the mouse wheel to see the large size ...           BIG FOTO

Phoenix 10.3 GATSBY

In the backstage, asymmetry fights back, beginning with a wolf teeth ratchet wheel and its eagle shaped click and aircraft’s spring, ending on the other side of the differential gear train, mounted on a winged bridge.

Click on the mouse wheel to see the large size ...           BIG FOTO

Phoenix 10.3 GATSBY Titanium 

The movement DR 1500 decoration is elevated to a new dimension. We climb on progressive or balcony angles and continued reliefs on different bridges. The oscillators beat at 21,600 variations per hour and the twin parallel barrels offer up to 60 hours of power reserve.

-------------------------
History
An authentic record saved in the Neuchâtel State Archives establishes that on March 29, 1718, a contract was concluded between Abraham Favre and the master watchmaker Daniel Gagnebin in which the former commits to teach Abraham Favre the profession of watchmaker to the extent of his knowledge for a period of three years.

This document marks the beginning of the Favre watchmaking history. Another official document dated from 1737 then mentions his son, also named Abraham, as a master watchmaker. From the fourth generation on, the trade name of the firm becomes Abraham Favre & Fils, and the timepieces are subsequently signed with the brand "A. Favre & Fils", symbol of the origin and the continuity.
-----------------------------------------------------
Technical Specifications

 Model: Phoenix 10.3 - Twin Regulator With Differential Gear
Movement
Movement Type: Manufacture Manual
Calibre: DR 1500/1
Frequency: 2 X 21,600 variations per hour
Diameter:  15 ‘’’ (lines) / 33.65 mm
Height: 7.09 mm
Jewelling: 65 jewels
Power Reserve: 60 Hours
Specifi cations: Twin parallel barrel, manual winding
Balance wheels: Two titanium balance wheels with regulating screws
Functions:   
• Central Hours and Minutes
• Off-Centred Sweeping Seconds
• Twin Regulator with Differential Gear
Case:
Case Shape: Round
Case Material: White Gold
Finishing: Superlative finishing by hand of every component
Diameter: Ø 41.00 mm
Thickness: 10.54 mm
Bezel: White Gold
Case Back: Transparent
Water Resistance:  30 meters in gold / 50 meters in titanium
Dial: Openwork skeleton
Bracelet:
Bracelet:  Black Leather
Clasp: Titanium Pin Buckle

------------------------------------
Montres AF&F S.A.
17 Rue du Clos
CH-1207 Geneva
Switzerland
+41 78 760 14 25
info@afavrefils.com
--------------------------------------------
www.facebook.com - AFavreFils
--------------------------------------------------
www.AFavreFils.com

RICHARD MILLE – RM 27-2 Tourbillon RAFAEL NADAL Limited Edition

RICHARD MILLE – RM 27-2 Tourbillon RAFAEL NADAL NTPT® carbon/TPT® quartz Limited Edition NEW

Watchmaking must be consistently challenged, both technically and artistically. With the RM 27-02, Richard Mille presents a new uncompromising caliber that reinterprets the art and methods of watch design in the 21st century.

It is in the run-up to the 114th French Open, where emblematic Richard Mille partner Rafael Nadal will be vying for his tenth title, that the Swiss Jura brand is unveiling its new manual winding tourbillon caliber dedicated to tennis.

  Click on the mouse wheel to see the large size ...                 BIG FOTO

Following research by Richard Mille’s engineers into NTPT® carbon — a material with remarkable mechanical properties and excellent resistance to micro-cracks—the brand is unveiling the very first skeletonised baseplate known as “unibody”, in which the caseband and baseplate have been fused into a single piece, removing the need to attach the two components together. This structure, inspired by the chassis of racing cars, enhances rigidity and resistance to impacts when used in watchmaking.

  Click on the mouse wheel to see the large size ...                 BIG FOTO

A major watchmaking and technological breakthrough machined at ProArt, the unibody baseplate is a technical feat that requires in-depth knowledge and mastery of micro-machining new materials—a concept that Richard Mille has nurtured since the very beginning.

  Click on the mouse wheel to see the large size ...                 BIG FOTO

The sculptural baseplate supports the bridges in grade 5 titanium, which are highly original in terms of their three-dimensional construction, their finishes (beveled, shot-blasted and satin-brushed by hand) and the complexity of their titanium and carbon composition. These bridges support an impressive mechanical heart capable of running for over 70 hours without detriment to its regularity thanks to a rapidly rotating barrel that delivers constant power from the beginning to the end of operation.

  Click on the mouse wheel to see the large size ...                 BIG FOTO

Such innovations are not limited to the heart of the watch, as demonstrated by the categorical absence of compromise on the case. Dressed in black and white, it inevitably catches the eye with its unique appearance.
Working with North Thin Ply Technology, Richard Mille’s engineers have developed a highly original material known as TPT® quartz, composed of hundreds of layers of quartz filaments piled on top of each other. These fibers are exceptionally resistant to high temperatures and are characterized by extreme strength and transparency to electromagnetic waves.

  Click on the mouse wheel to see the large size ...                 FOTO

No thicker than 45 microns, the silica layers are inserted between layers of NTPT® carbon by an automatic positioning system that changes the orientation of the fibers between each layer by 45°. Heated to 120°C in an autoclave similar to those used to make aeronautical components, the material is then ready for machining at ProArt. During this phase, the various layers of TPT® quartz and NTPT® carbon are revealed at random, ensuring that each machined component is as unique as the heart of the baseplate, which is machined using the same process.

  Click on the mouse wheel to see the large size ...                 BIG FOTO

  Photo - Stefano Galuzzi

The bezel and solid case back in NTPT® carbon/TPT® quartz are then attached to the unibody baseplate using 12 spline screws in grade 5 titanium. A sapphire crystal with anti-glare treatment adds the final finishing touch to this unique combination.

  Click on the mouse wheel to see the large size ...                 BIG FOTO

  Photo - Stefano Galuzzi

Like the RM 006, RM 008 and RM 012 tourbillons, the RM 27-02 belongs to the elite circle of Richard Mille watches destined to leave their mark on their era.

  Click on the mouse wheel to see the large size ...                 BIG FOTO

With a production run of just 50 models, the RM 27-02 is a rare product reserved for those closest to the brand. As usual, Rafael Nadal will carry out the ultimate approval test by wearing this new caliber in his international matches.

  Click on the mouse wheel to see the large size ...                 BIG FOTO

Photo - Stefano Galuzzi 

--------------------------------------------------------

TECHNICAL SPECIFICATIONS

Reference: RM27-2 CA-FQ

CALIBER
RM27-02: Manual winding tourbillon movement with hours and minutes.
UNIBODY BASEPLATE
The baseplate, machined from NTPT® carbon, is an integral part of the case. For the first time at Richard Mille, the case middle has been removed. The bezel and case back are assembled directly on the baseplate, which is described as “unibody”, a type of racing-car construction that ensures maximum rigidity and greater resistance to impacts.
The skeletonised NTPT® carbon baseplate is a feat of machining. A master component of the RM 27-02, it has been subjected to a full battery of extreme approval tests in order to optimize its mechanical properties.
ARCING BRIDGES
In grade 5 Titanium.
Beveled, shot-blasted and satin-brushed by hand.
FREE SPRUNG BALANCE WITH VARIABLE INERTIA
A free sprung balance with variable inertia and a terminal-curve spring guarantees greater reliability in case of impacts and during movement assembly and disassembly, thus achieving better chronometric results over time.
POWER RESERVE
70 hours (±10%).
CRYSTAL
In sapphire (1800 Vickers) with anti-glare treatment (2 sides).
Thickness: 1.20 mm and 4.09 mm at the edges.
FAST ROTATING BARREL (6 hours per revolution instead of 7.5 hours)
This type of barrel has the following advantages:
- The phenomenon of periodic internal mainspring adhesion is significantly diminished and performance is thus enhanced, - It provides an excellent delta of the mainspring curve. The choice is determined by the ideal power reserve performance/regularity ratio.
BARREL PAWL WITH PROGRESSIVE RECOIL
This device permits an appreciable winding gain (circa 20 %), especially during the start of winding. It also promotes the even distribution of the mainspring’s internal tension.
SPLINE SCREWS IN GRADE 5 TITANIUM FOR THE CASE
Due to their design, these screws offer better control of the torque applied to them during assembly.
They therefore remain unaffected by the physical manipulations involved in assembly and dismantling, and age well.
OTHER FEATURES
- Movement dimensions: 29.30 mm x 29.60 mm.
- Thickness: 7.10 mm.
- Balance diameter: 10.00 mm.
- Number of jewels: 19.
- Balance: in Glucydur, with 2 arms and 4 setting screws.
- Moment of inertia: 11.50 mg.cm2, angle of lift 53°.
- Frequency: 3 Hz (21,600 vph).
- Balance spring: in ELINVAR by Nivarox®.
- Shock absorbers: Kif Elastor by KE 160 B28.
- Barrel shafts: in nickel-free Chronifer (DIN x 46 Cr13 + S), with the following characteristics: stainless, non-magnetic, tempered.
DIMENSIONS
47.77 x 39.70 x 12.25 mm.
CASE IN QUARTZ TPT®
The bezel and case back are made from NTPT® carbon and Quartz TPT® , a groundbreaking new material designed and developed by Richard Mille in partnership with North Thin Ply Technology.
QTPT® is composed of over 600 layers of parallel filaments obtained from separating silica threads. These layers, no thicker than 45 microns, are saturated in a white resin developed specially for Richard Mille, then inserted between layers of NTPT® carbon using an automatic positioning system that changes the orientation of the fibers between each layer by 45°. It is then heated to 120°C and subjected to a pressure of 6 bars in an autoclave similar to those used to make aeronautical components, before the material is ready for machining on a CNC machine at Proart, Richard Mille’s case factory. Machining unveils the various TPT® Quartz layers at random, ensuring that each machined component is unique.
TORQUE LIMITING CROWN
This additional security system prevents from accidental overwinding, which could cause damage to the winding stem or putting extreme pressure on the mainspring barrel.
FINISHING
Movement
- Gradual hand-polished beveling - Shot-blasted milled sections
- Stretched upper surfaces
Steel Parts
- Shot-blasted surfaces
- Satin-brushed surfaces
- Hand-polished beveling
- Long strokes
- Matt “brouillé” strokes
- Long strokes on the sides - Polished sinks

Limited Edition of 50 pieces
--------------------------------
www.fundacionrafanadal.org
---------------------------------------
RICHARD MILLE
Communications Director
Richard Mille Europe, Middle East & Africa Ltd.
Mobile 44 (0) 7747 640013
Email  beatrice.giusti@richardmille-emea.com
-------------------------------------------------------------
www.facebook.com - Richard Mille
-----------------------------------------------------------------------
www.RichardMille.com