MING Watches x J.N. Shapiro – 37.06 Lightning Guilloché 38mm Steel Edition 2026
.jpg)
A collaboration between friends, featuring a handmade guilloché dial by J.N. Shapiro, heat-colored by Ming Thein so that no two are exactly alike.
Click, to see the large size. ▶ BIG FOTO .jpg)
The MING × J.N. Shapiro 37.06 Lightning is a joint project between Horologer MING and J.N. Shapiro, two founding members of the Alternative Horological Alliance (AHA), and the product of a long-running friendship between Ming Thein and Josh Shapiro.
Click, to see the large size. ▶ BIG FOTO .jpg)
The two brands have previously worked together on the AHA tantalum bracelet and the cases for the MING Project 21, but the 37.06 Lightning is their first watch presented together.
Click, to see the large size. ▶ BIG FOTO .jpg)
It began with a shared desire to create something together, and a simple question: What happens when two independent makers bring their own forms of handwork to the same dial?
The answer begins in Los Angeles, inside Josh Shapiro’s workshop. Every Lightning dial is crafted from grade-2 titanium and individually engine-turned by hand on a traditional roseengine lathe using a pattern called “Lightning guilloché.”
Click, to see the large size. ▶ BIG FOTO
.jpg)
.jpg)
This marks the first time a wristwatch by Josh Shapiro has used this specific pattern, creating a hypnotic texture that gives the surface a sense of dynamism that feels right at home in a MING. The material and pattern both demand precision, and the guilloché process carries a high failure rate. It is slow, precise, tactile work, and it sets the stage for everything that follows.
Click, to see the large size. ▶ BIG FOTO
.jpg)
From California, the dials travel to Kuala Lumpur, where Ming Thein heat-colors each dial with a handheld butane torch. The process transforms the dial into a polychromatic field of deep blue, rich purple, and vibrant orange-yellow. The unique coloration does not depend on paint, lacquer, or any additional surface coating – only heat, timing, restraint, and creative license.
Click, to see the large size. ▶ BIG FOTO .jpg)
There is very little room for error when heating the dials. Just a few seconds too long or too short with the torch can create uneven color distribution and ruin the dial entirely. Even with perfect control of the torch, the guilloché process can expose variations in the titanium’s crystalline structure that compromise the final result.
Click, to see the large size. ▶ BIG FOTO .jpg)
The failure rate is high, with only about one in every three dials making it into a finished watch. The dials that make the cut are never exactly alike, with each final color gradient unique to that particular dial. Lightning, after all, never strikes twice.
Click, to see the large size. ▶ BIG FOTO .jpg)
This synergistic process makes the 37.06 Lightning more personal than the typical watch collaboration. Josh Shapiro and his team engine-turn every dial by hand, and Ming Thein personally heat-colors each one by hand *. They both leave their creative fingerprints on the Lightning’s most visible element.
Click, to see the large size. ▶ BIG FOTO .jpg)
* After a brief attempt to make heat treatment a team effort, it was determined that the rest of Team MING could not be left unsupervised with a butane torch.
Click, to see the large size. ▶ BIG FOTO .jpg)
The dial is housed in MING’s familiar 37-series case, crafted here from 316L stainless steel. Measuring 38mm in diameter, 10.9mm in thickness, and 44.5mm lug-to-lug, the case is designed to maximize dial presence while preserving real-world wearability. Its narrow bezel allows the Lightning to wear visually larger and thinner than the dimensions suggest, while the sculpted lug profile requires multi-axis machining to flow cleanly from the case flanks into the lugs.
Click, to see the large size. ▶ BIG FOTO .jpg)
The 37.06 Lightning is topped by a domed sapphire crystal with laser-hollowed cavities filled with luminous HyCeram, which serve as indices. The hour and minute hands receive multiple applications of Super-LumiNova X1 for a more even, longer-lasting glow. The nonluminous portions of each hand are anodized blue to complement the heat-colored dial beneath. There is no seconds hand, keeping the timekeeping display focused and uninterrupted.
Click, to see the large size. ▶ BIG FOTO .jpg)
Inside is the manual-wind Sellita for MING calibre SW210.M1, a MING-exclusive execution with skeletonized, rhodium-plated bridges and an anthracite-coated baseplate. The power reserve is approximately 42 hours. The watch is sealed with domed sapphire crystals on the front and back, both with double-sided anti-reflective coating, and offers 100 meters of water resistance.
Pricing & Availability
The production for the MING × J.N. Shapiro 37.06 Lightning is constrained by craftsmanship, as each dial must first be engine-turned by J.N. Shapiro in Los Angeles and then individually heat-colored by Ming Thein in Kuala Lumpur.
Click, to see the large size. ▶ BIG FOTO .jpg)
The 37.06 Lightning is priced at CHF 6,250. A limited initial stock will be available immediately when orders open on Friday, 5 June, at 1:00 PM GMT. From July 2026 onward, MING and J.N. Shapiro aim to produce approximately 10 examples per month. Watches will be available through www.ming.watch and MING’s authorized retail partners.
Click, to see the large size. ▶ BIG FOTO .jpg)
The 37.06 Lightning will be displayed publicly at upcoming MING events in Los Angeles, Taiwan, Chicago, and Geneva.
--------------------------------------------------
TECHNICAL SPECIFICATIONS
Model MING × J.N. Shapiro 37.06 Lightning Edition
CaseMaterial: 316L stainless steel, brushed and polished finish
Diameter: 38 mm
Thickness: 10.90 mm
Lug-to-lug: 44.50 mm
Caseback engraved with “DIAL HAND MADE BY J.N. SHAPIRO & MING THEIN”
Water-resistant to 100 meters
Dial
Handmade engine-turned guilloché dial in grade-2 titanium by J.N. Shapiro in Los Angeles; heat-colored by Ming Thein in Kuala Lumpur
Domed sapphire crystals front and rear, both with double-sided antireflective coating
Top crystal engraved and filled with HyCeram luminous indices
Super-LumiNova X1-coated hands
Movement
Sellita for MING Cal. SW210.M1
Manual winding movement
Diameter: 25.6mm
Thickness: 3.35mm
Number of jewels: 18
Power reserve of 42 hours
Skeletonized, rhodium-plated bridges with brushed finish
Anthracite-coated baseplate
Functions
Hours and minutes
Strap
Blue Barenia calfskin strap with Alcantara lining from Jean Rousseau
Curved quick-release spring bars
Flying-blade tuck buckle with micro-adjustment
Lug width: 20 mm
🔰Limited by production
✅Free Shipping 🔴 Price: CHF 6'250 💰
2-year warranty against defects
Available via www.ming.watch or our authorised retail partners
------------------------------
Press releases - 2026
------------------------------
---------------------
About J.N. Shapiro Watches
My name is Joshua Shapiro, and I am the founder and CEO of the eponymous brand J.N. Shapiro Watches. I am also an educator with a Bachelor’s and Master’s in U.S History. I began by making traditional engine-turned dials for other watchmakers. In 2018, I launched the Infinity Series, which featured highly complex, engine-turned dials with traditional and exotic materials. Soon after, in December of 2021, we produced the first tantalum wrist watch cases made outside of Switzerland for the Infinity Series.
The Resurgence is the latest of our creations, a fully U.S. made watch in development for over four years. It is a culmination of a dream that began from the humblest of starts. Our watches are meant to inspire individuals to pursue perfection, to enjoy both the journey and the destination.
==================================
www.jnshapirowatches.com
==================================
www.instagram.com - jnshapiro_watches
---------------------------------------------------
Instagram -Mingwatches
-------------------------------------------------
www.facebook.com - Mingwatches
------------------------------------------------------
Ming.watch
No comments:
Post a Comment