ARNOLD & SON – CHRONOMETRY Constant Force Tourbillon 11 Yellow Gold Edition - 2025
A CELEBRATION OF WATCHMAKING
INGENUITY
The 41.5 mm diameter Constant Force Tourbillon 11 watch in 18-carat yellow gold, released by Arnold & Son as a limited edition of 11, is driven by a hand-wound mechanical movement. Equipped with two barrels to give a 100-hour power reserve, this timepiece was entirely developed and built at the manufacture in La Chaux-de-Fonds. It is fitted with a constant force mechanism visible on the enamel dial and is regulated by a tourbillon that can be seen on the back.
Click, to see the large size. ▶ BIG FOTO .jpg)
The architecture of this calibre is inspired by that of the timekeeping instrument driven by the first tourbillon created by Abraham-Louis Breguet in 1808, based on a chronometer movement designed by John Arnold. This first tourbillon regulator, now in the British Museum, was given to John Roger Arnold by the Paris-based watchmaker in honour of his scientific collaboration and friendship with his father. The Constant Force Tourbillon 11 timepiece, designed to mark the end of the 260th anniversary celebrations of John Arnold’s legacy, pays tribute to the watchmaker’s ingenuity and his close association with Abraham-Louis Breguet.
Click, to see the large size. ▶ BIG FOTO %20BM_back.jpg)
John Arnold and A.-L. Breguet, silver cased chronometer with tourbillon and spring-detent escapement, London, England, 1774 and Paris, France, 1808
© The Trustees of the British Museum
The greatest watchmakers of the Age of Enlightenment often knew each other. Some of them exchanged views and appreciated each other despite language barriers and political obstacles. And this was the case with John Arnold and Abraham-Louis Breguet. These two watchmakers, undoubtedly the most productive of the second half of the 18th century, forged a friendship that nothing could shake, not even the throes of war between the two countries or the French Revolution. Aware of their respective talents, during Abraham-Louis Breguet’s frequent trips to London between 1789 and 1791, they shared their views and knowledge of the principles of timekeeping, furthering the science of timekeeping, which in their eyes definitely knew no frontiers.
When context is everything
While John Arnold was captivated by the understated design of Abraham-Louis Breguet’s watches and his understanding of complex kinematics, Abraham-Louis Breguet was fascinated by his English friend’s ability to invent simple mechanisms that could be mass-produced and approached a chronometric precision that no other watchmaker of the time could hope to achieve. During their exchanges, which included sending their respective sons to train with the other, these two geniuses were able to work out the best way of eliminating the running errors of watch balances.
Click, to see the large size. ▶ BIG FOTO %20BM_face.jpeg)
The English watchmaker concentrated on optimising his detent escapement and developing balances, such as special springs, so as to offer instruments capable of satisfying his proto-industrial approach to chronometer construction – especially as the Admiralty asked him to produce them in ever greater quantities and at ever lower prices.
Click, to see the large size. ▶ BIG FOTO %20British%20Museum.jpg)
Meanwhile, Abraham-Louis Breguet, inspired by his conversations with his English friend on the principles of high chronometry, continued to work on developing the tourbillon during his exile in Switzerland from 1792. On his return to Paris in 1795, he wrote about the development of a rotating carriage in a letter. Then, two years after John Arnold’s death in 1799, he patented this mechanism under the name ‘tourbillon’ in Paris on 26 June 1801, i.e. 7 Messidor Year IX according to the French Republican calendar still in effect at the time.
Click, to see the large size. ▶ BIG FOTO%20BM_back.jpg)
To honour the memory of his friend and remember the research they had carried out together, he based his first tourbillon regulator on the movement of
John Arnold’s marine chronometer no.
11. He screwed an engraved silver plate onto the main bridge with the following dedication:
“The first tourbillon regulator by Breguet incorporated in one of the first works of Arnold. Breguet's homage to the revered memory of Arnold. Presented to his son in the year 1808.” This timekeeping instrument, now in the
British Museum, was given to John Roger Arnold, who succeeded his father as head of the workshop and
London boutique.
A chronometer designed to tell a story
As a tribute to their work and in memory of the friendship between these two watchmaking geniuses during the Age of Enlightenment, Arnold & Son has chosen to give this Constant Force Tourbillon 11 watch a 41.5 mm diameter 18-carat yellow gold case with a classic design. The yellow hue of this precious metal was chosen because it was often used by John Arnold for prestigious pocket watches at the time. It is in perfect harmony with the openworked bridge of the constant force mechanism, which is also made of 18-carat yellow gold.
Click, to see the large size. ▶ BIG FOTO.jpg)
The timepiece’s curved case middle helps to reduce its profile. The front features a thin bezel set with a slightly domed sapphire crystal with an anti-reflective coating on both sides. On the reverse, it has an open case back in yellow gold with an identical sapphire crystal, revealing the manual winding manufacture calibre with the reference
A&S5219. Water-resistant up to a pressure of 3 bar (30 metres or
100 feet), the watch is worn on an alligator leather strap fastened around the wrist with a classic pin buckle in 18-carat yellow gold bearing the
Arnold & Son monogram.
A precious and captivating dial
For the Constant Force Tourbillon 11 timepiece, Arnold & Son chose a white Grand Feu enamel dial to recall the dials of the ship’s chronometers that John Arnold offered to English naval officers in his London boutique. This disc was individually produced by a specialist artisan on an 18-carat yellow gold base. White enamel is obtained by melting powdered materials in a kiln heated to just over 800°C. After firing the enamel several times to achieve the required thickness, the surface is lapped to make it smooth and even.
Click, to see the large size. ▶ BIG FOTO.jpg)
Then, as long as the material has not cracked and there are no imperfections that would spoil the white colour, a translucent enamel is applied and the disc is fired one last time. This gives it depth and transparency, bringing out the full magic of the enamel, whose hue is permanent and is called ‘Grand Feu’ (great fire) because it is vitrified by melting. Openings are then made in this delicate and precious disc to accommodate the constant force mechanism and white opal subdial – a true signature of the House. Here, for the first time at
Arnold & Son, this fine stone has been recessed to give it a stronger visual presence and an angle that enhances the readability of the black transfer Roman numerals.
A calibre worthy of the master of chronometers
The A&S5219 movement was specially developed by the Manufacture’s engineers and watchmakers to the specifications of the Constant Force Tourbillon 11 watch. To remain as faithful to the original movement as possible, this calibre is hand-wound.
Click, to see the large size. ▶ BIG FOTO.jpg)
But while inspired by the past, it remains thoroughly contemporary. It is equipped with two identical barrels mounted in series, giving a
100-hour power reserve. These barrels alternate in driving the mechanism, the second being activated when the torque of the first falls below optimum output.
A constant force mechanism
To guarantee the isochronism of the regulating group over 100 hours of operation, the movement’s designers incorporated a patented constant force mechanism between the going train and the tourbillon. Visible on the dial side, its purpose is to smooth out the energy delivered by the barrels so as to prevent excessive or insufficient torque from affecting the oscillations of the balance in the tourbillon carriage.
Click, to see the large size. ▶ BIG FOTO.jpg)
This constant force mechanism is held in place by an 18-carat yellow gold bridge and rotates over the course of one minute. In the
Constant Force Tourbillon 11, it replaces the fusee-and-chain configuration used by
John Arnold in his chronometers. As well as supplying a constant force, the system chosen for this timepiece also allows for a ‘dead-beat seconds’ indication, in which the direct-drive hand does not advance seamlessly, but instead makes successive jumps of exactly one second – much like the direct-drive seconds of marine chronometers, which also made very similar jumps (detent chronometers generally beat every half-second).
Click, to see the large size. ▶ BIG FOTO.jpg)
In the configuration chosen for the
Constant Force Tourbillon 11 watch, the seconds are not indicated by a conventional hand, but instead by the tip of a flame-blued anchor used as a structural bridge for the constant force mechanism.
A system intended to smooth out positional errors
Designed to celebrate the friendship between John Arnold and Abraham-Louis Breguet, the Constant Force Tourbillon 11 watch has a transparent anti-reflective sapphire crystal case back that showcases the architecture of the A&S5219 calibre, inspired by the back of the timekeeper kept in the British Museum.
Click, to see the large size. ▶ BIG FOTO .jpg)
Here, the tourbillon carriage, which rotates once every minute, keeps the general design of the carriage used by
John Arnold’s brilliant friend in the timepiece intended to commemorate their unbreakable friendship and embody the true scope of their joint research.
Click, to see the large size. ▶ BIG FOTO.jpg)
The extremely refined tourbillon features a very thin, polished and rounded-off linear carriage bridge that reveals a variable inertia balance with inertia blocks inspired by the most sophisticated oscillators used in
John Arnold’s chronometers.
Click, to see the large size. ▶ BIG FOTO.jpg)
The House also chose to incorporate a T-shaped retaining spring inspired by the one used in the ‘pare-chute’ shock protection system developed by
Abraham-Louis Breguet and which can be found on the tourbillon bridge of the original instrument. However, a Swiss lever escapement, which is more practical and less sensitive to shocks, was chosen over the detent escapement of the original timepiece.
Click, to see the large size. ▶ BIG FOTO
The finishes of the mainplate, bridge and tourbillon cock are virtually identical on both timepieces, while the grained and chamfered barrel bridge of the
Constant Force Tourbillon 11 watch features hand-engraved inscriptions and the famous plate, which has a new text inspired by the original:
“To the revered memory of John Arnold and Abraham-Louis Breguet. Friends in their time, legendary watchmakers always.” . These words underscore the historical and horological context of this
Arnold & Son edition of
11 timepieces, where friendship and the art of timekeeping were the strongest driving forces.
---------------------------------------------
TECHNICAL SPECIFICATIONS
Collection: CHRONOMETRY
Model:
CHRONOMETRY Constant Force Tourbillon 11 Yellow Gold Edition Reference 1FCBJ.E01A.C246J
Click, to see the large size. ▶ BIG FOTO .jpg)
Movement Calibre A&S5219 hand-wound mechanical movement, constant force, one-minute tourbillon
Jewels 35Diameter 33 mm
Thickness 10.48 mm
Power reserve 100 hoursFrequency 3 Hz / 21,600 vphFinishes mainplate: 3N golden finish, grained, polished angles
barrel bridge: 3N golden finish, grained, polished angles, stretched edges, hand-engraved
tourbillon bridge: golden finish, grained, polished angles, stretched edges, satin-finished Durnico steel retaining spring
screws: blued, chamfered, mirror-polished heads
tourbillon: mirror-polished carriage plate, satin-finished pallet bridge, mirror-polished stud-holder, rhodium-finished balance, polished and rounded-off carriage bridge
constant force bridge: 18-carat yellow gold (3N), polished bevel, satin-finished flat surface, polished angles
constant force carriage lower bridge: flame-blued, mirror-polished, polished angles
Engraved plate To the revered memory of John Arnold and
Abraham-Louis Breguet. Friends in their time, legendary watchmakers always.
Functions hours, minutes, true-beat seconds
Dial white Grand Feu enamel, 18-carat yellow gold (3N) base
Hour dial white opal, concave
CaseMaterial 18-carat yellow gold (3N)
Diameter 41.5 mm
Depth 13.7 mm
Crystal domed sapphire, anti-reflective coating on both sides
Case back sapphire crystal, anti-reflective coating on both sides
Water-resistance 3 bar (30 metres/100 feet)
StrapMaterial midnight blue alligator leather with black alligator leather lining
Buckle pin buckle, 18-carat yellow gold (3N)
🔰Edition -✅only ❱❱❱ 11 timepieces
🔴Swiss retail price CHF 129,800 excl. tax (subject to change)💰
---------------------------
Press releases - 2025
-----------------------------
------------------------------------------
Marketing & Sales
Boulevard des Eplatures 38
CH – 2300 La Chaux-de-Fonds
Switzerland
info@arnoldandson.com
------------------------------------------------
www.facebook.com - Arnold and Son 1764
----------------------------------------------------
www.Arnold&Son.com
.jpg)
%20BM_back.jpg)
%20BM_face.jpeg)
%20British%20Museum.jpg)
%20BM_back.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)