HYSEK – IO Skeleton Central Tourbillon Gold 45mm Limited Edition
IO SKELETON CENTRAL TOURBILLON:
EVEN MORE LIGHT AND TRANSLUCENCE
EVEN MORE LIGHT AND TRANSLUCENCE
The new IO Skeleton Central Tourbillon features an entirely different design compared to its predecessor, further highlighting its Central Tourbillon. In this new, limited edition of just 88 pieces, skeletonisation and transparency take pride of place, benefiting from innovative metallisation and openwork techniques.
Hysek continues to transcend the art of watchmaking, taking it to whole new levels of ingenuity and audacity, accompanied by all the technical and aesthetic skills its independent status gives it the freedom to deploy. The new IO Skeleton Central Tourbillon embodies this ongoing ascent.
The HW22 caliber with which the piece is fitted allows the central tourbillon to remain at the heart of its identity. Hysek also painstakingly searched for the perfect way to arrange the hours and minutes around it; indeed, very few watches feature layouts around a central tourbillon, and even fewer use a flying tourbillon do so. Add to that the facts that the piece is fitted with jumping hours and boasts a skeletonised assembly, and one is left wondering who else apart from Hysek would be capable of pulling off such a feat.
Click, to see the large size. ▶ BIG FOTO
The central tourbillon is the dominant feature in the composition, and very much sets the tone of the piece. Fully visible, without any obstacles, it is hand-finished and features a “flying” design – this means it has a cage held in place only by its lower bridge, with no upper bridge. Being supported only from below gives the impression of it floating in thin air, hence the adjective “flying”. This rare, authentic Haute Horlogerie complication adds a sense of lightness to the piece, further enhanced by the skeletonisation of the plate.
Click, to see the large size. ▶ BIG FOTO
This exercise in skeletonisation has also been extended to the entire movement. Not satisfied with simply making the components openwork, Hysek has redesigned their shape and location in order to have a caliber that leaves as much room as possible for light to shine through, resulting in a completely new arrangement. Adopting the same approach to the final aesthetic appearance, Hysek has also designed hours and minutes discs that feature their own special openwork, revealing a movement that has been refined to its simplest expression.
An intuitive tiered time display
A tiered time display is arranged around this flying tourbillon. The time is read intuitively, even as the user’s gaze is naturally drawn towards the tourbillon. The hours window is displayed at 12 o’clock, and denoted by a luminous triangle, the bottom of which opens out naturally towards the minutes. A second luminous marker indicates the 60 minutes as they pass by in rotation. Here again, one’s gaze is constantly drawn down and to the right, to the tourbillon, as it marks out the seconds in a mesmerising, airborne ballet.
Click, to see the large size. ▶ BIG FOTO
The architecture of this composition is unique – not only for Hysek, but probably in watchmaking as a whole. Not only that, the hours and minutes discs are fully skeletonised. In an unusual approach, the figures used do not rest on a translucent surface. Instead, they have been cut out one by one, and are literally suspended in mid-air, held in place only at the top. The hours disc is rotated by the outer rim of the piece, while the minutes ring is held in place by the four golden arms forming the structure of the watch. Connoisseurs of the manufacture will recognise their hallmark positioning at 1, 5, 7 and 11 o’clock – Hysek’s own four cardinal points, used in the layout of most of its creations. To further aid time-telling, Hysek has added still another touch: each figure is coated with blocks of SuperLumiNova, each individually moulded to the nearest micron. The result is a far cry from standard-fare luminous coating added as an additional layer: the technique uses face-fixed blocks, which are denser and produce far better brightness.
A dynamic finish showcasing the central tourbillon
For this limited edition of just 88 watches, Hysek has developed an exclusive finish. The aim is to enhance and amplify the tourbillon movement, the entire focus of this new IO. The upper sapphire crystal is decorated with a circular metallisation pattern that appears to emanate directly from the tourbillon, thus heightening its visual impact. To maximise the effect, Hysek has also removed the micro-rotor from its caliber, offering the most unobstructed view possible of the skeletonisation.
Click, to see the large size. ▶ BIG FOTO
At 12 o’clock, Hysek has crafted a bespoke blue section, providing a backdrop against which the minutes stand out in excellent contrast. To maintain a coherent style effect, the same blue is also to be found on each of the 14 blue-tinted screws visible on the dial, in the finest Haute Horlogerie tradition, as well as being used for the “Hysek” name.
Click, to see the large size. ▶ BIG FOTO
The new IO Tourbillon Central Squelette is 45 millimetres in diameter, boasts a 42-hour power reserve, and comes in an 18-carat rose gold case featuring three-clawmark lugs, one of the manufacturer’s signature touches.
------------------------------------------
TECHNICAL SPECIFICATIONS
Model: IO 45mm Skeleton Central Tourbillon Edition
Ref. IO4527R04
MOVEMENT
Hysek Calibre HW22
Manual Mechanical
Central flying tourbillon
Hour & minute
24-hour jumping hours
Circular satin-finish decoration
316 components
65 jewels
Power Reserve 45 hours ± 3 hours
Frequency 28,800 vph
CASE
Dimensions : Ø 45mm x E12mm
Round shape
18k rose gold
Water resistance 30m
Sapphire crystal with anti-reflection
Sunburst metalized back sapphire crystal
DIAL
Skeletonised dial,
skeletonised hours and minutes discs, SLN block figures
STRAP
Alligator strap
Deployment clasp
Limited Edition of 88 watches
-----------------------------
Press Release - 2018
-----------------------------
--------------------------------
MANUFACTURE HYSEK SA
Chemin de la Vignette 1
CH-1167 Lussy-sur-Morges
Phone +41 21 804 90 90
Fax +41 21 803 19 29
marketing@hysek.com
----------------------------------------------
www.facebook.com - Hysek Manufacture
-----------------------------------------------------
Hysek.com